Counter barriers and food guards in tempered glass instead of plastic — polished on every exposed edge, cut with pass-through openings, and drilled for the bracket or standoff you're using.
Flat tempered panels with polished edges and radius corners.
Panels with a CNC-cut transaction opening, edges finished.
Drilled for standoffs, clamps or post systems.
Printed bands so people see the glass before they walk into it.
| Sizes | Any size to 90" × 144" |
| Thickness | 1/4", 5/16", 3/8" (6–10 mm) typical |
| Glass types | Clear, low-iron |
| Edgework | Flat polish standard; pencil edge on request |
| Fabrication | Cutouts, standoff holes, radius corners |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | CPSC 16 CFR 1201, ANSI Z97.1, ASTM C1048 · permanent temper mark |
Need a spec not listed? We quote off your drawing, not off a catalog.
DXF, DWG, PDF or a dimensioned sketch. We check hole placement and edge distances against tempering limits before we price it — so the quote you get is the part you can actually have.
Start a quote →Something not covered? Call the shop — you'll reach someone who has run the oven.
Acrylic scratches, yellows and clouds with disinfectant. Tempered glass cleans indefinitely and looks like part of the fixture rather than a temporary measure.
Yes, on the CNC with the opening edges finished, before tempering.
5/16" or 3/8" depending on height and how it's supported. Send the layout and we'll recommend one.
Dimensions, thickness, finish and quantity are enough for a first number. Drawings and photos welcome.
