Straight shelves
Polished-edge tempered shelves cut to your bracket spacing.
FURNITURE & CABINETRY Shelving Quotes in one business day
ARCHITECTURAL & BUILDING
FURNITURE & CABINETRY
VEHICLE GLASS (DOT)
INDUSTRIAL & EQUIPMENT
Shelf glass for fixtures, cabinets and closets — thick enough for the span, edged on all four sides, notched or drilled for whatever bracket you're using.
Polished-edge tempered shelves cut to your bracket spacing.
Quarter-rounds and bullnose fronts cut on the CNC.
Notches and holes for standards, pins and cable systems.
3/8" and 1/2" (10–12 mm) for long spans and merchandise loads.
| Sizes | Any size to 90" × 144" |
| Thickness | 1/4", 5/16", 3/8", 1/2" (6–12 mm) |
| Glass types | Clear, low-iron, tinted |
| Edgework | Flat polish standard on exposed shelf edges |
| Fabrication | Notches, holes, radius corners |
| Size tolerance | ± 1/32" on cut size; squareness within 1/16" |
| Standards | CPSC 16 CFR 1201, ANSI Z97.1, ASTM C1048 · permanent temper mark |
| Lead time | 7–12 business days |
Need a spec not listed? We quote off your drawing, not off a catalog.
DXF, DWG, PDF or a dimensioned sketch. We check hole placement and edge distances against tempering limits before we price it — so the quote you get is the part you can actually have.
Start a quote →Something not covered? Call the shop — you'll reach someone who has run the oven.
It depends on load and bracket spacing more than length. Tell us the span and what goes on it and we'll recommend a thickness rather than guessing.
Yes, cut before tempering along with any holes. Send the standard's profile or a dimensioned sketch.
On shelving, yes — the edge is visible and gets handled, so flat polish is the default.
Dimensions, thickness, finish and quantity are enough for a first number. Drawings and photos welcome.